We have been highly appraised by our prominent clients for manufacturing and exporting qualitative Drill Collar. We manufacture this product range by making use of cutting-edge machines and optimum quality AISI 4145H chromium molybdenum alloy steel sourced from the certified vendors of the domain. We offer these collars in distinguished diameters, sizes and specifications to gratify the requirements of our precious clients. Drill Collar offered by us is widely used in drilling machines to provide less weight to drill bits and this also helps in keeping drill bits centralized and hole track by huge rigidity.
Features:
Rigid construction
Precise dimensions
Excellent durability
Specifications:
Connection | Drill Collar O.D. | Drill Collar I.D. | Length | Shoulder Taper O.D. | Bending Strength Ratio | ||
mm | in | mm | in | mm | mm | ||
NC23-31 | 79.4 | 3 1/8 | 31.8 | 1 1/4 | 9150 | 76.2 | 2.57:1 |
NC26-35(2 3/8IF) | 88.9 | 3 1/2 | 38.1 | 1 1/2 | 9150 | 82.9 | 2.42:1 |
NC31-41(2 7/8IF) | 104.8 | 4 1/8 | 50.8 | 2 | 9150/ 9450 | 100.4 | 2.43:1 |
NC35-47 | 120.7 | 4 3/4 | 50.8 | 2 | 9150/ 9450 | 114.7 | 2.58:1 |
NC38-50(3 1/2IF) | 127.0 | 5 | 57.2 | 2 1/4 | 9150/ 9450 | 121.0 | 2.38:1 |
NC44-60 | 152.4 | 6 | 57.2 | 2 1/4 | 9150/ 9450 | 144.5 | 2.49:1 |
NC44-60 | 152.4 | 6 | 71.4 | 2 13/16 | 9150/ 9450 | 144.5 | 2.84:1 |
NC44-62 | 158.8 | 6 1/4 | 57.2 | 2 1/4 | 9150/ 9450 | 149.2 | 2.91:1 |
NC46-62(4IF) | 158.8 | 6 1/4 | 71.4 | 2 13/16 | 9150/ 9450 | 150.0 | 2.63:1 |
NC46-65(4IF) | 165.1 | 6 1/2 | 57.2 | 2 1/4 | 9150/ 9450 | 154.8 | 2.76:1 |
NC46-65(4IF) | 165.1 | 6 1/2 | 71.4 | 2 13/16 | 9150/ 9450 | 154.8 | 3.05:1 |
NC46-47(4IF) | 171.4 | 6 3/4 | 57.2 | 2 1/4 | 9150/ 9450 | 159.5 | 3.18:1 |
NC50-67(4 1/2IF) | 171.4 | 6 3/4 | 71.4 | 2 13/16 | 9150/ 9450 | 159.5 | 2.37:1 |
NC50-70(4 1/2IF) | 177.8 | 7 | 57.2 | 2 1/4 | 9150/ 9450 | 164.7 | 2.54:1 |
NC50-70(4 1/2IF) | 177.8 | 7 | 71.4 | 2 13/16 | 9150/ 9450 | 164.7 | 2.73:1 |
NC50-72(4 1/2IF) | 184.2 | 7 1/4 | 71.4 | 2 13/16 | 9150/ 9450 | 169.5 | 3.12:1 |
NC56-77 | 196.8 | 7 3/4 | 71.4 | 2 13/16 | 9150/ 9450 | 185.3 | 2.70:1 |
NC56-80 | 203.2 | 8 | 71.4 | 2 13/16 | 9150/ 9450 | 190.1 | 3.02:1 |
6 5/8REG | 209.6 | 8 1/4 | 71.4 | 2 13/16 | 9150/ 9450 | 195.7 | 2.93:1 |
NC61-90 | 228.6 | 9 | 71.4 | 2 13/16 | 9150/ 9450 | 212.7 | 3.17:1 |
7 5/8REG | 241.3 | 9 1/2 | 76.2 | 3 | 9150/ 9450 | 223.8 | 2.81:1 |
NC70-97 | 247.6 | 9 3/4 | 76.2 | 3 | 9150/ 9450 | 232.6 | 2.57:1 |
NC70-100 | 254.0 | 10 | 76.2 | 3 | 9150/ 9450 | 237.3 | 2.81:1 |
8 5/8REG | 279.4 | 11 | 76.2 | 3 | 9150/ 9450 | 266.7 | 2.84:1 |
Type:
Standard drill collars
Standard drill collars are made of 4145H chromium molybdenum alloy steel. Residual elements such as sulfur and phosphorus are reduced during the steelmaking process that make the kind of material with high physical properties.
Connection:
All connections are precision-machined to API specifications.
API relief groove pin and bore back box stress relief are available on request. Thread roots are cold-worked to offer a greater resistance to fatigue.
All connections are phosphated to minimize galling during makeup and applied with thread storage compound.
Thread protectors are installed to ensure adequate joint protection during shipment.
Note:
When inquiring on drill collars, please specify info. below:
1) Outside diameter, bore and length;
2) Size and type of connection: each end of collar and special joint features;
3) Slick, Spiral or Non-Magnetic ;
4) Other special features: slip and elevator recesses and/or hard band type.